TEMT6200Fx01 www.vishay.com vishay semiconductors rev. 1.9, 25-jun-14 1 document number: 81317 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ambient light sensor in 0805 package description TEMT6200Fx01 ambient light sensor is a silicon npn epitaxial planar phototransistor in a miniature transparent 0805 package for surface mounting. it is sensitive to visible light much like the human eye and has peak sensitivity at 550 nm. features ? package type: surface mount ? package form: 0805 ? dimensions (l x w x h in mm): 2 x 1.25 x 0.85 ? aec-q101 qualified ? high photo sensitivity ? adapted to human eye responsivity ? supression filter for near infrared radiation ? angle of half sensitivity: ? = 60 ? floor life: 168 h, msl 3, acc. j-std-020 ? lead (pb)-free re flow soldering ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 applications ? automotive sensors ? ambient light sensor for display backlight dimming in: - mobile phones - notebook computers -pdas - cameras - dashboards note ? test condition see table basic characteristics note ? moq: minimum order quantity product summary component i pce (a) ? (deg) 0.5 (nm) TEMT6200Fx01 23 60 450 to 610 ordering information ordering code packaging remarks package form TEMT6200Fx01 tape and reel moq: 3000 pcs, 3000 pcs/reel. label with i pce group on each reel. specifications of group a/b/c see table type dedicated characteristics 0805 absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit collector emitter voltage v ceo 6v emitter collector voltage v eco 1.5 v collector current i c 20 ma power di ssipation p v 100 mw junction temperature t j 100 c operating temperature range t amb -40 to +100 c storage temperature range t stg -40 to +100 c soldering temperature acc. reflow profile fig. 9 t sd 260 c thermal resistance junction/ambient soldered on pcb with pad dimensions: 4 mm x 4 mm r thja 450 k/w
TEMT6200Fx01 www.vishay.com vishay semiconductors rev. 1.9, 25-jun-14 2 document number: 81317 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 1 - power dissipation limit vs. ambient temperature note ? each 3000 piece packing unit will co ntain a single group. th e label on the bag will indicate which binned group is in the bag. a specific group cannot be ordered. prod uction shipments containing multiple bags will likely include multiple groups. please design accordingly . 020406080 0 25 50 75 100 125 p v - power dissipation (mw) t amb - ambient temperature (c) 100 94 8308 r thja = 450 k/w basic characteristics (t amb = 25 c, unless otherwise specified) parameter test condition symbol min. typ. max. unit collector emitter breakdown voltage i c = 0.1 ma v ceo 6v collector dark current v ce = 5 v, e = 0 lx i ceo 350na collector emitte r capacitance v ce = 0 v, f = 1 mhz, e = 0 lx c ceo 16 pf photo current e v = 20 lx, cie illuminant a, v ce = 5 v i pce 4.6 a e v = 100 lx, cie illuminant a, v ce = 5 v i pce 7.5 23 39 a temperature coefficient of i pce cie illuminant a tk ipce 1.18 %/k led, white tk ipce 0.9 %/k angle of half sensitivity ? 60 deg wavelength of peak sensitivity p 550 nm range of spectral bandwidth 0.5 450 to 610 nm collector emitter sa turation voltage e v = 20 lx, 0.45 a v cesat 0.1 v type dedicated characteristics (t amb = 25 c, unless otherwise specified) parameter test condition binned group symbol min. max. unit photo current e v = 100 lx, cie illuminant a, v ce tz51 = 5 v ai pce 7.5 15 a bi pce 12 24 a ci pce 19.5 39 a
TEMT6200Fx01 www.vishay.com vishay semiconductors rev. 1.9, 25-jun-14 3 document number: 81317 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 basic characteristics (t amb = 25 c, unless otherwise specified) fig. 2 - collector dark current vs. ambient temperature fig. 3 - relative photo current vs. ambient temperature fig. 4 - photo current vs. illuminance fig. 5 - photo current vs. collector emitter voltage fig. 6 - collector emitter capacitance vs. collector emitter voltage fig. 7 - relative spectral sensitivity vs. wavelength 19758 100 80 60 40 20 0 -20 -40 t - ambient temperature (c) amb i - collector dark current (a) ceo 10 10 -6 -7 10 -8 10 -9 10 -10 10 -11 10 -12 10 -13 v ce = 5 v 19759 100 80 60 40 20 0 -20 -40 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 i pce rel - relative photo current t amb - ambient temperature (c) v ce = 5 v, white led 0.001 0.01 0.1 1 10 10 100 1000 10 000 20769 e v - illuminance (ix) i pce - photo current (ma) v ce = 5 v 0.01 0.1 1 10 012345 v ce - collector emitter voltage (v) i pse - photo current (ma) 100 lx 200 lx 500 lx 1 klx 3 klx 10 klx 20770 19762 f = 1 mhz c ce0 - collector emitter capacitance (pf) v ce - collector emitter voltage (v) 25 20 15 10 5 0 0.1 1.0 10.0 400 500 600 700 800 900 1000 1100 - wavelength (nm) 0.0 0.2 0.4 0.6 0.8 1.0 1.2 s ( ) - relative spectral sensitivity rel 20116
TEMT6200Fx01 www.vishay.com vishay semiconductors rev. 1.9, 25-jun-14 4 document number: 81317 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 8 - relative radiant sensitivity vs. angular displacement reflow solder profile fig. 9 - lead (pb)-free reflow solder profile acc. j-std-020 drypack devices are packed in moistu re barrier bags (mbb) to prevent the products from mo isture absorption during transportation and storage. each bag contains a desiccant. floor life time between soldering and re moving from mbb must not exceed the time indicated in j-std-020: moisture sensitivity: level 3 floor life: 168 h conditions: t amb < 30 c, rh < 60 % drying in case of moisture absorpt ion devices should be baked before soldering. conditions see j-std-020 or label. devices taped on reel dry us ing recommended conditions 192 h at 40 c (+ 5 c), rh < 5 %. 0.4 0.2 0 s rel - relative sensitivity 94 8318 0.6 0.9 0.8 0 30 10 20 40 50 60 70 80 0.7 1.0 ? - angular displacement 0 50 100 150 200 250 300 0 50 100 150 200 250 300 time (s) temperature (c) 240 c 245 c max. 260 c max. 120 s max. 100 s 217 c max. 30 s max. ramp up 3 c/s max. ramp down 6 c/s 19841 255 c
TEMT6200Fx01 www.vishay.com vishay semiconductors rev. 1.9, 25-jun-14 5 document number: 81317 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters 19757
TEMT6200Fx01 www.vishay.com vishay semiconductors rev. 1.9, 25-jun-14 6 document number: 81317 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 blister tape dimensions in millimeters 20690 quantity per reel: 3000 pcs
TEMT6200Fx01 www.vishay.com vishay semiconductors rev. 1.9, 25-jun-14 7 document number: 81317 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 reel dimensions in millimeters of the wheel i s s upplier s pecific. form of the leave open i ss ue: 2; 26.04.10 drawing-no.: 9.800-5096.01-4 s pecification s according to din technical drawing s ? 177.8 max. ? 55 min. 8.4 +2.5 8.4 +0.15 14.4 max. ? 13 + 0.5 - 0.2 1.5 min. ? 20.2 min. z z 2:1 20875
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
